Wash your hands, disinfect your environment
ADIBOT-A
Due to the global impact of Covid-19, it has become necessary to design and prepare disinfection solutions that can ensure a clean environment for both infected and susceptible people with the least possible human intervention.
The most optimal solution to avoid cross-contamination is found in UV-C disinfection, since UV radiation, in addition to not disinfecting the area with chemicals, also frees the air from bacteria, destroys the DNA and RNA composition of microorganisms, thus preventing bacteria from dividing on surfaces and in the atmosphere.
In addition to killing 99% of bacteria and pathogenic microorganisms by UV-C disinfection, ADIBOT-A is able to perform all this autonomously (autonomously) in the system defined by us, after a short calibration and mapping process!
The robot can be controlled from a mobile phone or tablet using the downloadable application!
Parameters
General Parameters
Size (Width x Height x Length) | 609mm x 1725mm x 550mm |
Weight | 79kg |
Operating temperature | 0°C ~ 40°C |
Operating humidity | 10 ~ 85% (For indoor use only) |
Storage Temperature | -10°C ~ 60°C |
Storage humidity | ≤95% |
| | | |
Disinfection Parameters | UV-C Germicidal lamps | (8+8)*UV-C ozone-free & shatterproof |
UV-C wavelength | 253.7nm | |
I lamp power | 41W | |
I lamp length | 851mm | |
I lamp life | 12000 óra | |
I intensity of lamp radiation | 141μW/cm² | |
II lamp power | 14W | |
II lamp length | 295mm | |
II lamp life | 12000 óra | |
II intensity of lamp radiation | 40μW/cm² | |
Total consumption | 440W | |
| | | |
Network | WIFI | 2.4GH/5GHz 802.11b/g/n/ac |
Bluetooth | Bluetooth 5.1 / BLE | |
| | | |
Sensors | LIDAR | 2 ( 1 above & 1 down ) |
RGBD | 1 | |
Camera | 1* Ultra-wide angle of view | |
PIR | 4 | |
| | Ultrasonic Sensor | 5 |
| | Anti-collision | 1 |
| | Magnetometer | 1 |
| | Infrared sensor | 1 |
| | | |
Acoustics | Speaker | 2 |
Performance | 12W | |
| | | |
Battery | Disinfection time | 3,5 hours |
Charging time | 4,5 hours | |
| | | |
Adapter | Cement Tension | 100 ~ 240V AC |
Current | 20A | |
| | | |
Mobility performance | Wheels | 2* Driven wheel & 2* Non-driven wheel |
Maximum obstacle height | 7mm | |
Maximum crack width | 2cm | |
Maximum angle of inclination | 5° | |
| | | |
Certificates | ISO9001, ISO14001:2015, ISO:14001, FCC, CE(EU), MIC (Japán) | |
