GUSTARD P26
A-CLASS BALLANCED PRE-AMPLIFIER
The Gustard P26 is an advanced pre-amplifier with volume control and 3-position input selector. As an innovative option the input and output signal levels can be adjusted separately. This useful feature allows the P26 to be paired with a wide range of devices.
AUDIOPHILE CIRCUIT DEVELOPMENT
The P26 pre-amplifier employs fully ballanced circuitry in the input stages, volume control and pre-amplifier stage all being fully ballanced design without any signal conversion. It uses two high-performance stereo LME49860 operational amplifiers which can be easily change to the type that suits individual needs thanks to the DIP-8 socket. The pre-amplifier stage is a hybrid design containing both operational amplifier units and discrete components. The output circuitry contains only discrete components for excellent signal stability.
ANALOGUE VOLUME CONTROL
Thanks to a relay matrix controlled by the ALTERA MAX logic circuit the P26 provides perfectly identical signal levels on both channels in all volume settings. This volume control mode combines the advantages of the digital and analog worlds: the clarity of analog sound and the convenience of precise digital control.
The Gustard P26's linear power supply is equipped with a high-speed rectifier and an ultra-low noise discrete voltage regulator. A 50 Watt toroidal transformer has been developed specifically for this unit. The selector switch on the rear of the unit allows you to switch between 230 / 110 volt supply mains.
CONTROLLED LINEAR POWER SUPPLY
The P26 comes with an infrared remote control to access volume control, mute and input selection functions, but all control options are also available via the front panel buttons. ON/OFF power button, plus a control knob for source selection and input/output gain level adjustment, and a rotary knob for precise volume control. The OLED display shows the active input source, current volume level and input/output gain parameters in real time.
DISPLAY, FRONT PANEL CONTROLS AND INFRARED REMOTE CONTROLLER
The P26 comes with an infrared remote control. This remote control gives the user access to volume, mute and source selection functions.
All controls are also available on the front panel. An ON/OFF button, a control button for source selection and input/output gain configuration. Finally, a rotary control lets you adjust the volume.
The OLED monitor screen shows the active source, current volume level and input/output gain parameters in real time.
FULL CONNECTION
The P26 is equipped with two pairs of balanced XLR inputs and one pair of unbalanced RCA inputs. On the output side, one pair of RCA and one pair of XLR connectors are available, allowing the P26 to be connected to both ballanced and single-ended amplifiers.
TECHNICAL DATA |
---|
Type | Preamp Volume controller |
Control | Related input gain / output gain control |
Output impedance | XLR: 100Ω RCA: 100Ω |
Maximum output level | RCA: 9.5 Vrms XLR: 19 Vrms (+ dBu) |
Class | AC 115V / 230V 50 / 60Hz (manual setting). |
AOP | 2x dual op-amp LM49860 DIP8 mounted on a stand (removable) |
Inputs | Symmetric XLR x 2 Asymmetric RCA x1 |
Outputs | Symmetric XLR x1 Asymmetric RCA x1 |
THD + N |
Channel crosstalk | -130dB @ 20-20KHz |
SNR | 130 dB |
Frequency response | 20-20KHz /+-0.1dB |
Remote controller | Yes |
Energy usage | Less than 20W |
Power | AC 115V / 230V 50 / 60Hz (manual setting). |
Sizes | Width 330 x Length 260 x Height 65 mm |